Best Guide to Clean an air purifier in Your Home. An air purifier serves the purpose of eliminating airborne pollutants from the atmosphere.
An air purifier serves the purpose of eliminating airborne pollutants from the atmosphere.
Although it may resemble a fan, its functionality extends beyond simply providing cool air. Air purifiers are employed in households to eliminate airborne allergens, dust, and other particles, thereby enhancing the overall Air Quality.
Despite their intended low maintenance, regular cleaning is necessary to ensure optimal performance. The following guidelines can be utilized to clean an air purifier and maintain its efficiency.
Properly Clean an Air Purifier
Required Items:
- Screwdriver (if necessary, depending on the model)
- A Vacuum Cleaner with a brush attachment
- Large bucket
- Microfiber cloth
- Plastic bag
- Dust mask
- Eye protection
- Gloves (optional).
Photo: Properly Clean an Air Purifier
Instructions:
Step 1: Unplug and Open the Air Purifier.
Disconnect the air purifier from its power source and find a suitable location for cleaning, such as a garage or outdoor area.
Wear protective goggles and a dust mask to shield yourself from released dust and allergens. If you have sensitive skin, gloves can also be used.
If needed, use a screwdriver to open the device and access the air intake grill.
Utilize a vacuum cleaner with a low setting and a brush attachment to remove any dirt, lint, or particles stuck in the grill or internal areas of the machine.
Step 2: Remove and Clean Additional Parts.
If your air purifier has removable components, ensure that you clean them as well.
Use a microfiber cloth to gently clean each piece thoroughly.
Avoid using water on parts that come into contact with electricity.
If you use a damp cloth on the interior, ensure all parts are completely dry before plugging in the purifier.
Step 3: Clean the Filter.
Cleaning air purifier filters may vary depending on the type of filter used.
Some filters are disposable, while others are washable or permanent. Follow the manufacturer’s instructions for your specific filter type.
Here are some general guidelines:
Remove the Filter:
Most models have a release button or latch to remove the filter.
Consult the owner’s manual if your model is different.
Discard Disposable Filters:
If the filter is disposable, place it in a plastic bag, seal it, and dispose of it in the trash.
Clean a Permanent Filter:
Use a vacuum cleaner with a low-pressure setting to remove dust and dirt from non-washable permanent filters.
Be cautious not to damage the filter with a soft-bristle brush attachment. These filters should not be wet.
Clean a Washable Filter:
Vacuum the washable filter first, then rinse it with warm water.
Allow it to dry completely (usually 24 hours) before reinstalling it in the device.
Clean a Carbon Filter:
Instructions for cleaning carbon filters vary.
Some can be washed with warm Soapy Water and dried before reuse, while others should be replaced entirely every 6-12 months.
Step 4: Reassemble the Air Purifier.
Ensure that all parts are completely dry before reassembling the air purifier, securely screwing it back together, and plugging it in.
To ensure proper functioning, run the device for about an hour and listen for any unusual noises or odors.
If anything seems amiss, refer to the manual to check for incorrect placement of parts or loose screws.
If you hear whistling, hissing, or beeping sounds, the filter may have been damaged during cleaning and should be replaced.
Make a note to repeat this cleaning process every three to six months for optimal performance.
*The information is for reference only.
